Mechanical Operations Use of grinding aids results in the Finer products Neither A nor B Enhanced production rate Both A & B Finer products Neither A nor B Enhanced production rate Both A & B ANSWER DOWNLOAD EXAMIANS APP
Mechanical Operations The value of work index does not change materially from one equipment to another. If the value of work index determined for close circuit grinding is Wi, then the same for open circuit grinding will be 3.34 Wi Wi 0.5 Wi 1.34 Wi 3.34 Wi Wi 0.5 Wi 1.34 Wi ANSWER DOWNLOAD EXAMIANS APP
Mechanical Operations The work index in Bond's law for crushing of solids has the following dimensions No units (dimensionless) KWh.m1/2/ton KWh/ton KW/ton No units (dimensionless) KWh.m1/2/ton KWh/ton KW/ton ANSWER DOWNLOAD EXAMIANS APP
Mechanical Operations Rod mills employed for grinding All of these Is useful for handling sticky materials Employ a steel shell having L/D ratio of 1.5 to 3.0 Employ steel rods of 2-12 cms diameter extending over full length of the mill All of these Is useful for handling sticky materials Employ a steel shell having L/D ratio of 1.5 to 3.0 Employ steel rods of 2-12 cms diameter extending over full length of the mill ANSWER DOWNLOAD EXAMIANS APP
Mechanical Operations In screen analysis, the notation +5 mm/-10 mm means particles passing through Neither 5 mm nor 10 mm screen 5 mm screen and retained on 10 mm screen 10 mm screen and retained on 5 mm screen Both 5 mm and 10 mm screens Neither 5 mm nor 10 mm screen 5 mm screen and retained on 10 mm screen 10 mm screen and retained on 5 mm screen Both 5 mm and 10 mm screens ANSWER DOWNLOAD EXAMIANS APP
Mechanical Operations In a mixer, the quantity, (v. L/D) is termed as __________ number(where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). Weber Schmidt Peclet Brinkman Weber Schmidt Peclet Brinkman ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS