Polymer Technology Transistor parts and refrigerator components are normally made of High density polythene Polyester Polyurathane Polystyrene High density polythene Polyester Polyurathane Polystyrene ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Condensation polymerisation of caprolac-tum is carried out in the reactor maintained at a temperature of __________ °C for producing nylon-6. 250-280 100 to 150 50 to 75 -20 to 25 250-280 100 to 150 50 to 75 -20 to 25 ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Low pressure Zeigler process of polythene manufacture Employs a pressure of 30 kgf/cm² Achieves an yield of 95-98% based on ethylene Produces very low density polythene Does not use any catalyst for polymerisation Employs a pressure of 30 kgf/cm² Achieves an yield of 95-98% based on ethylene Produces very low density polythene Does not use any catalyst for polymerisation ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Out of all the elastomers, natural rubber has the longest elongation range & flexibility of the order of __________ percent. 1000-1500 1-1000 2000-2500 1500-2000 1000-1500 1-1000 2000-2500 1500-2000 ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology The conversion of caprolactum in the above case is about __________ percent. 25 90 50 70 25 90 50 70 ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Addition polymerisation takes place either by a free radical mechanism or ionic machanism depending on the reagents used. Free radical polymerisation is catelyzed by __________ , which decompose to give free radicals. Hydroflouric acid Sulphuric acid None of these Organic peroxides Hydroflouric acid Sulphuric acid None of these Organic peroxides ANSWER DOWNLOAD EXAMIANS APP