Engineering Drawing This type of thread is a thread on the inside of a member: Major diameter thread External thread Internal thread Basic thread Major diameter thread External thread Internal thread Basic thread ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing This is a solid shape that fits inside the mold and forms a hole in a cooled cast metal or molten plastic object: Prototype Hole mold Core Cavity Prototype Hole mold Core Cavity ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first. Pull the line from away from the starting point very carefully Insure that Ortho is on Read the coordinate position on the Dynamic Readout Enter 3 for the length of the line Pull the line from away from the starting point very carefully Insure that Ortho is on Read the coordinate position on the Dynamic Readout Enter 3 for the length of the line ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing A partial auxiliary view usually shows only features on the _________ of the inclined line and not any projection of other planes. Center lines Plane Hidden lines None of these Center lines Plane Hidden lines None of these ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Schematic and single-line diagrams should be arranged so that signal or transmission path from input to output proceeds in this fashion: Left to right and top to bottom Left to right and bottom to top Right to left and top to bottom Right to left and bottom to top Left to right and top to bottom Left to right and bottom to top Right to left and top to bottom Right to left and bottom to top ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing On a floor plan the dashed line that appears approximately 24" outside the exterior wall represents the ________. Sidewalk None of these Roof overhang Plumbing drain lines Sidewalk None of these Roof overhang Plumbing drain lines ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS