Engineering Drawing These are used to attach parts to a cylinder so they won't turn on it: Key-seats and bearings Lugs and bearings Keys and key-ways/key-seats Knurls and keys Key-seats and bearings Lugs and bearings Keys and key-ways/key-seats Knurls and keys ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing When dimensioning architectural drawings architects will utilize both ________ and ________ options. Baseline and continuous Quick dim and linear Baseline and linear Linear and continuous Baseline and continuous Quick dim and linear Baseline and linear Linear and continuous ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first. Insure that Ortho is on Enter 3 for the length of the line Pull the line from away from the starting point very carefully Read the coordinate position on the Dynamic Readout Insure that Ortho is on Enter 3 for the length of the line Pull the line from away from the starting point very carefully Read the coordinate position on the Dynamic Readout ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing This type of axonometric drawing has equal foreshortening along two axis directions and a different amount on the third axis: Isometric Trimetric Dimetric Multiview Isometric Trimetric Dimetric Multiview ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing These are joined together in the field to build a structure: Steel fabrications Main members Assembled fabrications Riveted members Steel fabrications Main members Assembled fabrications Riveted members ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Lines of an isometric drawing that are not parallel to the isometric axes are called this: Non-isometric lines Trimetric lines Dimetric lines Multiview lines Non-isometric lines Trimetric lines Dimetric lines Multiview lines ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS