Nuclear Power Engineering Thermal neutrons which are used to cause the fission of U-235 have energy __________ eV. > 1 1-25 < 0.025 > 200 > 1 1-25 < 0.025 > 200 ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Coolant present in the primary circuit of a pressurised water reactor is high pressure Saturated water Superheated steam Saturated steam Sub cooled water Saturated water Superheated steam Saturated steam Sub cooled water ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for Faster heat removal rate from the core Achieving high degree of superheat in the steam Lowering the coolant circulation pressure Avoiding the mixing of water with radioactive sodium, as it may cause explosion Faster heat removal rate from the core Achieving high degree of superheat in the steam Lowering the coolant circulation pressure Avoiding the mixing of water with radioactive sodium, as it may cause explosion ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Main source of __________ is monazite sand. Polonium Thorium Hafnium Uranium Polonium Thorium Hafnium Uranium ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Radioactive decay is a __________ change. Nuclear Chemical Physical None of these Nuclear Chemical Physical None of these ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering H₂ is a better coolant than CO₂, due to its relatively Lower neutron capture cross-section Non-reactivity to uranium Lower density Higher specific heat Lower neutron capture cross-section Non-reactivity to uranium Lower density Higher specific heat ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS