Power Plant Engineering The primary fuel used in nuclear power plants is U₂₃₈ Pu₂₃₃ Pu₂₃₉ U₂₃₅ U₂₃₈ Pu₂₃₃ Pu₂₃₉ U₂₃₅ ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering In natural uranium, the constituents of three naturally occurring isotopes are U₂₃₄ = 0.006%, U₂₃₅ = 0.712% and U₂₃₈ = 99.282% U₂₃₄ = 0.006%, U₂₃₅ = 99.282% and U₂₃₈ = 0.712% U₂₃₄ = 99.282%, U₂₃₅ = 0.006% and U₂₃₈ = 0.712% U₂₃₄ = 0.712%, U₂₃₅ = 0.006% and U₂₃₈ = 99.282% U₂₃₄ = 0.006%, U₂₃₅ = 0.712% and U₂₃₈ = 99.282% U₂₃₄ = 0.006%, U₂₃₅ = 99.282% and U₂₃₈ = 0.712% U₂₃₄ = 99.282%, U₂₃₅ = 0.006% and U₂₃₈ = 0.712% U₂₃₄ = 0.712%, U₂₃₅ = 0.006% and U₂₃₈ = 99.282% ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering Ideally the neutron flux in reactor should be Uniform throughout Maximum at side and zero in canter Maximum in centre and zero at side Zero throughout Uniform throughout Maximum at side and zero in canter Maximum in centre and zero at side Zero throughout ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering In order to have constant chain reaction to produce a constant rate of heat output, the value of ratio of the number of neutrons in one generation to the number of neutrons in the immediately preceding generation must be Less than 1.0 Equal to 1.0 Greater than 1.0 Equal to zero Less than 1.0 Equal to 1.0 Greater than 1.0 Equal to zero ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering The most commonly used moderator in nuclear plants is Concrete and bricks Heavy water Graphite and concrete Graphite Concrete and bricks Heavy water Graphite and concrete Graphite ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering Solar thermal power generation can be achieved by Using focusing collector or heliostates using a solar pond Using flat plate collectors Any of the mentioned system Using focusing collector or heliostates using a solar pond Using flat plate collectors Any of the mentioned system ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS