Manufacturing And Production Technology The broaching operation in which either the work or the tool moves across the other, is known as Pull broaching Continuous broaching Push broaching Surface broaching Pull broaching Continuous broaching Push broaching Surface broaching ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology For machining a mild steel workpiece using carbide tool, the maximum material will be removed at a temperature of 175°C 275°C 100°C 50°C 175°C 275°C 100°C 50°C ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The swing diameter over the bed is ________ the height of the centre measured from the bed of the lathe. Equal to Twice Thrice One-half Equal to Twice Thrice One-half ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The ductile materials, during machining, produce Continuous chips Discontinuous chips Either (A) or (C) Continuous chips with built up edge Continuous chips Discontinuous chips Either (A) or (C) Continuous chips with built up edge ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A hole is of dimension φ = 9 ₊0⁺⁰∙⁰¹⁵ mm. The corresponding shaft is of dimension φ = 9 ₊0.001⁺⁰∙⁰¹⁰ mm. The resulting assembly has Loose running fit Transition fit Interference fit Close running fit Loose running fit Transition fit Interference fit Close running fit ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 26.56 36.56 20.56 30.56 26.56 36.56 20.56 30.56 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS