Chemical Engineering Basics Silicon crystal can be converted to p-type semi-conductor by doping with Nitrogen Phosphorous Carbon Boron Nitrogen Phosphorous Carbon Boron ANSWER DOWNLOAD EXAMIANS APP
Chemical Engineering Basics The ratio of thermal & electrical conductivity is same for all the metals at the same temperature ; and at around room temperature, this ratio is proportional to(where, T = absolute temperature, °K) 1/T² T² 1/T T 1/T² T² 1/T T ANSWER DOWNLOAD EXAMIANS APP
Chemical Engineering Basics What is the value of included angle of a triangular notch for maximum discharge ? 120° 60° 30° 90° 120° 60° 30° 90° ANSWER DOWNLOAD EXAMIANS APP
Chemical Engineering Basics Kinematic viscosity of water as compared to that of air is More 15% more Same 15% less More 15% more Same 15% less ANSWER DOWNLOAD EXAMIANS APP
Chemical Engineering Basics Filler material used in welding having the lowest melting point out of the following is Soft solder Brazing spelter Aluminium Silver solder Soft solder Brazing spelter Aluminium Silver solder ANSWER DOWNLOAD EXAMIANS APP
Chemical Engineering Basics Which of the following is not a characteristic observed in material failure by fatigue fracture ? Initation of crack occurs on the surface of the machine part Plastic deformation of material does not occur Initiation of crack from below the surface does not occur Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface Initation of crack occurs on the surface of the machine part Plastic deformation of material does not occur Initiation of crack from below the surface does not occur Presence of both rough & smooth zone with conchoidal markings in smooth zone of the surface ANSWER DOWNLOAD EXAMIANS APP