Computer Networking Select the correct cable that transport signals in the form of light: Fiber optic cable Twisted-Pair cable Coaxial Cable Shielded Twisted Pair cable Fiber optic cable Twisted-Pair cable Coaxial Cable Shielded Twisted Pair cable ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which class of IP address provides a maximum of only 254 host addresses per network ID? Class C Class B Class D Class A Class C Class B Class D Class A ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which network topology is considered passive? Cross Ring Mesh Star Bus Cross Ring Mesh Star Bus ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Different computers are connected to a LAN by a cable and a/an modem interface card telephone lines special wires None of these modem interface card telephone lines special wires None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Which two of the following commands will place network 10.2.3.0/24 into area 0?1. router eigrp 102. router ospf 103. network 10.0.0.04. network 10.2.3.0 0.0.0.255 area05. network 10.2.3.0 0.0.0.255 area 0 1 and 4 3 and 4 2 and 5 2, 4, and 5 1 and 4 3 and 4 2 and 5 2, 4, and 5 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking To configure the VLAN trunking protocol to communicate VLAN information between two switches, what two requirements must be met?1. Each end of the trunk link must be set to the IEEE 802.1e encapsulation.2. The VTP management domain name of both switches must be set the same.3. All ports on both the switches must be set as access ports.4. One of the two switches must be configured as a VTP server.5. A rollover cable is required to connect the two switches together.6. A router must be used to forward VTP traffic between VLANs. 1, 2 and 4 1 and 6 2 and 4 3, 5 and 6 1, 2 and 4 1 and 6 2 and 4 3, 5 and 6 ANSWER DOWNLOAD EXAMIANS APP