Theory of Structures The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is 1/3 1/4 1/8 1/2 1/3 1/4 1/8 1/2 ANSWER DOWNLOAD EXAMIANS APP
Theory of Structures A load of 1960 N is raised at the end of a steel wire. The minimum diameter of the wire so that stress in the wire does not exceed 100 N/mm² is: 4.5 mm 5.5 mm 5.0 mm 4.0 mm 4.5 mm 5.5 mm 5.0 mm 4.0 mm ANSWER DOWNLOAD EXAMIANS APP
Basic General Knowledge Guwahati High Court is the judicature of Assam Arunachal Pradesh All of the listed here Nagaland Assam Arunachal Pradesh All of the listed here Nagaland ANSWER DOWNLOAD EXAMIANS APP
Theory of Structures The ratio of the maximum deflections of a simply supported beam with a central load W and of a cantilever of same length and with a load W at its free end, is 1/10 1/16 1/12 1/8 1/10 1/16 1/12 1/8 ANSWER DOWNLOAD EXAMIANS APP
Theory of Structures A compound bar consists of two bars of equal length. Steel bar cross -section is 3500 mm²and that of brass bar is 3000 mm². These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm² and Eb = 0.1 MN/mm², the stresses developed are: b = 5 N/mm² s = 10 N/mm² b = 6 N/mm² s = 12 N/mm² b = 8 N/mm² s = 16 N/mm² b = 10 N/mm² s = 20 N/mm 2 b = 5 N/mm² s = 10 N/mm² b = 6 N/mm² s = 12 N/mm² b = 8 N/mm² s = 16 N/mm² b = 10 N/mm² s = 20 N/mm 2 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS