Automation System One of the following is not considered a method of input control in a CAD system. Plotter Touch terminal Programmable function box Joystick None of these Plotter Touch terminal Programmable function box Joystick None of these ANSWER DOWNLOAD EXAMIANS APP
Automation System A continuous process is: used only with analog controllers. self-contained in that raw materials enter the process and an identifiable products exits the process. None of these one that never shuts down used only for simple tasks used only with analog controllers. self-contained in that raw materials enter the process and an identifiable products exits the process. None of these one that never shuts down used only for simple tasks ANSWER DOWNLOAD EXAMIANS APP
Automation System Actuators are used to: All of these sense an object make a mechanical movement None of these activate a chemical All of these sense an object make a mechanical movement None of these activate a chemical ANSWER DOWNLOAD EXAMIANS APP
Automation System The program execution time: All of these None of these cannot be changed once the program is written will vary depending on the language used must be slower than the fastest mechanical operation that is to be controlled All of these None of these cannot be changed once the program is written will vary depending on the language used must be slower than the fastest mechanical operation that is to be controlled ANSWER DOWNLOAD EXAMIANS APP
Automation System The SKETCHPAD system is expensive because it is sophisticated and make demands on the power and resources of the computer. None of these consisted of an cathode-ray oscilloscope driven by a Lincoln Tx2 computer where by graphical information was displayed on the screen. is used for interactive Graphics All of these is expensive because it is sophisticated and make demands on the power and resources of the computer. None of these consisted of an cathode-ray oscilloscope driven by a Lincoln Tx2 computer where by graphical information was displayed on the screen. is used for interactive Graphics All of these ANSWER DOWNLOAD EXAMIANS APP
Automation System A common data base is one requisite for converting CAD and CAM to CIM. Another is that: the system must make provision for new techniques. the user must have access to both hardware and software None of these there should be a common 3-D part description system. technical assistance must be provided to the user. the system must make provision for new techniques. the user must have access to both hardware and software None of these there should be a common 3-D part description system. technical assistance must be provided to the user. ANSWER DOWNLOAD EXAMIANS APP