Environmental Engineering On standard silica scale, the turbidity in drinking water should be limited to 10 ppm 30 ppm 20 ppm 50 ppm 10 ppm 30 ppm 20 ppm 50 ppm ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering In a BOD test, 1.0 ml of raw sewage was diluted to 100 ml and the dissolved oxygen concentration of diluted sample at the beginning was 6 ppm and it was 4 ppm at the end of 5 day incubation at 20°C. The BOD of raw sewage will be 400 ppm 300 ppm 200 ppm 100 ppm 400 ppm 300 ppm 200 ppm 100 ppm ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering The length of rectangular sedimentation tank should not be more than (Where ‘B’ is the width of the tank) B 2B 8B 4B B 2B 8B 4B ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering If the time of concentration is 9 minutes, then the intensity of rainfall according to British Ministry of Health formula will be 4 mm/hr 10 mm/hr 40 mm/hr 20 mm/hr 4 mm/hr 10 mm/hr 40 mm/hr 20 mm/hr ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering The amount of coagulant needed for coagulation of water increases with (i) Increase in turbidity of water (ii) Decrease in turbidity of water (iii) Increase in temperature of water (iv) Decrease in temperature of water The correct answer is (i)and(iv) (i) and (ii) (ii) and (iii) (ii) and (iv) (i)and(iv) (i) and (ii) (ii) and (iii) (ii) and (iv) ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering Residual chlorine in water is determined by Both (A) and (B) Orthotolidine method Starch iodide method None of these Both (A) and (B) Orthotolidine method Starch iodide method None of these ANSWER DOWNLOAD EXAMIANS APP