Microwave Communication __________ is the progressive decrease of signal strength with increasing distance. Modulation Attenuation Propagation Radiation Modulation Attenuation Propagation Radiation ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication Klystron oscillators are most often used in the frequency range of 30 to 30000 MHz 10 to 10000 MHz 300 to 3000 MHz 3000 to 30000 MHz 30 to 30000 MHz 10 to 10000 MHz 300 to 3000 MHz 3000 to 30000 MHz ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication The cavity resonator Has a low Q factor for narrow operation. Produces a frequency which is independent of the cavity size. In a reflect klystron has its output taken from the reflector plate Is equivalent to an LC resonant circuit Has a low Q factor for narrow operation. Produces a frequency which is independent of the cavity size. In a reflect klystron has its output taken from the reflector plate Is equivalent to an LC resonant circuit ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication The antenna separations (in meters) required for optimum operation of a space diversity system can be calculated from:where R = effective earth radius (m) and L = path length (m) S = λR/RL S = λR/L S = 3λR/L S = 2λR/L S = λR/RL S = λR/L S = 3λR/L S = 2λR/L ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication A thin layer of dirt and grime coverts the reflecting surface of the parabolic dish of a radar set. The particular effect on the performance of the radar will be A reduction in horizontal resolution A decrease in gain A decrease in range No noticeable effect A reduction in horizontal resolution A decrease in gain A decrease in range No noticeable effect ANSWER DOWNLOAD EXAMIANS APP
Microwave Communication In a pulsed radar set, the STC circuit is used to Reduce interference from the effects of sea return Improve the target bearing resolution Vary the pulse frequency in order to control the maximum target Increases receiver sensitivity for echoes from targets Reduce interference from the effects of sea return Improve the target bearing resolution Vary the pulse frequency in order to control the maximum target Increases receiver sensitivity for echoes from targets ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS