Mass Transfer __________ is concerned with the adsorption equilibria. Freundlich equation Gibb's equation None of these Fick's law Freundlich equation Gibb's equation None of these Fick's law ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer For achieving rapid drying rate in a spray dryer, the diameter of the particles in the feed should be in the range of __________ microns (1 mm = 1000 microns). 200-300 > 500 22190 43835 200-300 > 500 22190 43835 ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Moisture in a solid exerting an equilibrium vapour pressure equal to that of the pure liquid at the same temperature is called the __________ moisture. Bound Critical Unbound Free Bound Critical Unbound Free ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer During constant rate drying period, vaporisation rate per unit drying surface area Does not affect the moisture content of the wet solid Increases with time Does not change with time Decreases with time Does not affect the moisture content of the wet solid Increases with time Does not change with time Decreases with time ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer As the reflux ratio increases, the slope of the operating line for rectifying section Decreases Data insufficient, cannot be predicted Remains constant Increases Decreases Data insufficient, cannot be predicted Remains constant Increases ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In a distillation operation, what is the effect of the temperature of the reflux stream (given below) on the condenser and reboiler loads? Reflux conditions:(i) Reflux stream is completely liquid and is at its bubble point.(ii) Reflux stream is below its bubble point. Both condensor and reboiler loads are higher in case (ii) as compared to case (i) Reboiler load is the same in both the cases but condenser load is higher in case (ii) Condenser load is the same in both the cases but reboiler load is higher in case (ii) Condenser and reboiler loads are the same in both the cases Both condensor and reboiler loads are higher in case (ii) as compared to case (i) Reboiler load is the same in both the cases but condenser load is higher in case (ii) Condenser load is the same in both the cases but reboiler load is higher in case (ii) Condenser and reboiler loads are the same in both the cases ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS