Applied Mechanics and Graphic Statics In which of the following trusses, the method of substitution is required for determining the forces in all the members of the truss by graphic statics? Warren truss King post truss Fink truss Howe truss Warren truss King post truss Fink truss Howe truss ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics A projectile is fired at an angle ‘θ’ to the vertical. Its horizontal range will be maximum when ‘θ’ is 90° 30° 0° 45° 90° 30° 0° 45° ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics For maximum range of a projectile, the angle of projection should be 45° 30° 60° None of these 45° 30° 60° None of these ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics A stone was thrown vertically upwards from the ground with a velocity of 50 m/sec. After 5 seconds another stone was thrown vertically upwards from the same place. If both the stones strike the ground at the same time, then the velocity with which the second stone was thrown should be (Assume g = 10 m/sec²) 15 m/sec 50 m/sec 25 m/sec 40 m/sec 15 m/sec 50 m/sec 25 m/sec 40 m/sec ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics A body A of mass 6.6 kg which is lying on a horizontal platform 4.5 m from its edge is connected to the end of a light string whose other end is supporting a body of mass 3.2 kg as shown in below figure. If the friction between the platform and the body A is 1/3, the acceleration is 0.5 m/sec² 1.25 m/sec² 1.00 m/sec² 0.75 m/sec² 0.5 m/sec² 1.25 m/sec² 1.00 m/sec² 0.75 m/sec² ANSWER DOWNLOAD EXAMIANS APP
Applied Mechanics and Graphic Statics Power developed by a torque, is 2πNT/4500 h.p 2πNT /60 watts All listed here 2πNT kg m/min 2πNT/4500 h.p 2πNT /60 watts All listed here 2πNT kg m/min ANSWER DOWNLOAD EXAMIANS APP