Electric Circuits In RLC series circuit if the Q factor is 1, then the damping of the system is Critical damping Under damping Undamping Over damping Critical damping Under damping Undamping Over damping ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Coating generally recommended for hard surfacing is copper plating. None of these chromium plating. lead plating. copper plating. None of these chromium plating. lead plating. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits One atomic mass unit ( amu ) is approximately equal to 1.6 × 10-24 Kg. 1.6 × 10-13 Kg. 1.6 × 10-19 Kg. 1.6 × 10-27 Kg. 1.6 × 10-24 Kg. 1.6 × 10-13 Kg. 1.6 × 10-19 Kg. 1.6 × 10-27 Kg. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits A circuit contains two unequal resistor in parallel voltage drops across both are same. heat losses in both are same. voltage drops are according to their resistive value. currents in both are same. voltage drops across both are same. heat losses in both are same. voltage drops are according to their resistive value. currents in both are same. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Current source has internal impedance connected in parallel with it whereas voltage source has internal impedance connected in __________________ with it. parallel both of above none of them series parallel both of above none of them series ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits 1 F is theoretically equal to ratio of 1 V to 1 C none of these 1 ohm of resistance ratio of 1 C to 1 V ratio of 1 V to 1 C none of these 1 ohm of resistance ratio of 1 C to 1 V ANSWER DOWNLOAD EXAMIANS APP