Manufacturing And Production Technology In machining metals, chips break due to __________ of work material. Ductility Work hardening Elasticity Toughness Ductility Work hardening Elasticity Toughness ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In ultrasonic machining, tool is made of Tungsten carbide Brass or copper Diamond Stainless steel Tungsten carbide Brass or copper Diamond Stainless steel ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Which of the following operations is carried out at a minimum cutting velocity if the machines are equally rigid and the tool work materials are the same? Boring Turning Milling Grinding Boring Turning Milling Grinding ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology With the same tool life, the maximum material per minute is removed by Increasing the depth of cut Decreasing the cutting speed Increasing the cutting speed Increasing the feed rate Increasing the depth of cut Decreasing the cutting speed Increasing the cutting speed Increasing the feed rate ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The chamfering is an operation of Reducing the diameter of a workpiece over a very narrow surface Beveling the extreme end of a workpiece Enlarging the end of a hole cylindrically Embossing a diamond shaped pattern on the surface of a workpiece Reducing the diameter of a workpiece over a very narrow surface Beveling the extreme end of a workpiece Enlarging the end of a hole cylindrically Embossing a diamond shaped pattern on the surface of a workpiece ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In determining the various forces on the chip, Merchant assumed that the Only continuous chip without built-up-edge is produced Cutting edge of the tool is sharp and it does not make any flank contact with the workpiece Cutting velocity remains constant All of these Only continuous chip without built-up-edge is produced Cutting edge of the tool is sharp and it does not make any flank contact with the workpiece Cutting velocity remains constant All of these ANSWER DOWNLOAD EXAMIANS APP