Computer Hardware In laser printer technology, what happens during the conditioning stage? A uniform negative charge is placed on the photosensitive drum The corona wire places a uniform positive charge on the paper A uniform negative charge is placed on the toner All of these None of these A uniform negative charge is placed on the photosensitive drum The corona wire places a uniform positive charge on the paper A uniform negative charge is placed on the toner All of these None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware In which mode can two or more applications be stored in memory at the same time? Protected Mode None of these Unprotected Mode Segmented Mode Real Mode Protected Mode None of these Unprotected Mode Segmented Mode Real Mode ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware Suppose that the power lamp in on, but the printer will not print. What can you do to correct the problem? Replace the ribbon Make sure the printer is on line Turn the printer on and off Replace the AC line fuse Replace the ribbon Make sure the printer is on line Turn the printer on and off Replace the AC line fuse ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware After displaying the directory of a floppy disk, a different floppy is inserted into the drive. The contents of the original floppy continue to display regardless of the director requests on the other floppies placed in the drive. You remove the drive in question and install it into your test system, and it does not exhibit the problem. You should next replace the: System's floppy drive device driver Original IDE controller None of these System's power supply Floppy drive ribbon cable System's floppy drive device driver Original IDE controller None of these System's power supply Floppy drive ribbon cable ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware What configuration should a Volt-Ohm meter he set to when testing a fuse? DC volts Ohms None of these Amperage AC volts DC volts Ohms None of these Amperage AC volts ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware You are installing an IDE hard drive that will be your boot drive. Which is the correct order of steps that need to be followed? jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition jumper properly, partition, low level format, high level format jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch jumper properly, auto-detect in CMOS, regular format jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition jumper properly, partition, low level format, high level format jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch jumper properly, auto-detect in CMOS, regular format jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS