RL Circuits In a parallel RL circuit, there are 3 A rms in the resistive branch and 3 A rms in the inductive branch. The total rms current is 424 mA 6 A 4.24 A 42.4 A 424 mA 6 A 4.24 A 42.4 A ANSWER DOWNLOAD EXAMIANS APP
RL Circuits A 12 kΩ resistor is in series with a 90 mH coil across an 8 kHz ac source. Current flow in the circuit, expressed in polar form, is I = 0.3 angle 0° mA. The source voltage, expressed in polar form, is 3.84 angle 20.6° V 13.84 angle 69.4° V 12.8 angle 20.6° V 0.3 angle 20.6° V 3.84 angle 20.6° V 13.84 angle 69.4° V 12.8 angle 20.6° V 0.3 angle 20.6° V ANSWER DOWNLOAD EXAMIANS APP
RL Circuits A 140Ω resistor is in parallel with an inductor having 60 inductive reactance. Both components are across a 12 V ac source. The magnitude of the total impedance is 90Ω 200Ω 5.51Ω 55.15Ω 90Ω 200Ω 5.51Ω 55.15Ω ANSWER DOWNLOAD EXAMIANS APP
RL Circuits The voltages in Problem 5 are measured at a certain frequency. To make the resistor voltage less than the inductor voltage, the frequency is not a factor increased decreased doubled not a factor increased decreased doubled ANSWER DOWNLOAD EXAMIANS APP
RL Circuits When the frequency of the voltage applied to a series RL circuit is increased, the phase angle decreases does not change cannot be determined without values increases decreases does not change cannot be determined without values increases ANSWER DOWNLOAD EXAMIANS APP
RL Circuits In a series RL circuit, 12 V rms is measured across the resistor, and 14 V rms is measured across the inductor. The peak value of the source voltage is 26.0 V 18.4 V 2 V 20 V 26.0 V 18.4 V 2 V 20 V ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS