Workshop Technology In a compound die Two or more operations are performed simultaneously at the single stroke of the ram Both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram Two or more cutting operations are performed at one station of the press in every stroke of the ram Only one operation is performed at each stroke of the ram Two or more operations are performed simultaneously at the single stroke of the ram Both cutting and non-cutting operations are performed at one station of the press in every stroke of the ram Two or more cutting operations are performed at one station of the press in every stroke of the ram Only one operation is performed at each stroke of the ram ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In spot welding, the distance between the nearest edge of the plate and centre of weld should be equal to 1.5 d 6d 3d d 1.5 d 6d 3d d ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The mode of deformation of the metal during spinning is Stretching Bending and stretching Rolling and stretching Bending Stretching Bending and stretching Rolling and stretching Bending ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The diaphragm moulding machine is used to Ram the sand harder at the pattern face with decreasing hardness towards the back of the mould Give uniform sand hardness throughout the mould Ram the sand harder at the back of the mould and softer on the pattern face Produce uniform packing of sand in the mould Ram the sand harder at the pattern face with decreasing hardness towards the back of the mould Give uniform sand hardness throughout the mould Ram the sand harder at the back of the mould and softer on the pattern face Produce uniform packing of sand in the mould ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For obtaining a cup of diameter 25 mm and height 15 mm by drawing, the size of the round blank should be approximately 46 mm 44 mm 48 mm 42 mm 46 mm 44 mm 48 mm 42 mm ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The cutting edge of a chisel should be Case hardened Hardened and tempered Tempered Hardened Case hardened Hardened and tempered Tempered Hardened ANSWER DOWNLOAD EXAMIANS APP