Structural Analysis If in a rigid-jointed space frame, (6m + r) < 6j, then the frame is Unstable None of these Stable and statically indeterminate Stable and statically determinate Unstable None of these Stable and statically indeterminate Stable and statically determinate ANSWER DOWNLOAD EXAMIANS APP
Structural Analysis For the stability of a structural part, the weight or anchorage should be Sum of (a) and (b) 1.2 times the minimum overturning moment due to dead load None of these 1.4 times the minimum overturning moment due to dead load Sum of (a) and (b) 1.2 times the minimum overturning moment due to dead load None of these 1.4 times the minimum overturning moment due to dead load ANSWER DOWNLOAD EXAMIANS APP
Structural Analysis If there are m unknown member forces, r unknown reaction components and j number of joints, then the degree of static indeterminacy of a pin-jointed plane frame is given by m + r – 3j m + r + 2j m – r + 2j m + r – 2j m + r – 3j m + r + 2j m – r + 2j m + r – 2j ANSWER DOWNLOAD EXAMIANS APP
Structural Analysis A load W is moving from left to right support on a simply supported beam of span T. The maximum bending moment at 0.4 1 from the left support is 0.16 Wl 0.20 Wl 0.24 Wl 0.25 Wl 0.16 Wl 0.20 Wl 0.24 Wl 0.25 Wl ANSWER DOWNLOAD EXAMIANS APP
Structural Analysis A single rolling load of 8 kN rolls along a girder of 15 m span. The absolute maximum bending moment will be 8 kN.m 60 kN.m 30 kN.m 15 kN.m 8 kN.m 60 kN.m 30 kN.m 15 kN.m ANSWER DOWNLOAD EXAMIANS APP
Structural Analysis A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10 kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to a 1 kN load at its centre ? 0.5 mm 0.005mm 5 mm 0.05 mm 0.5 mm 0.005mm 5 mm 0.05 mm ANSWER DOWNLOAD EXAMIANS APP