Furnace Technology If fuel and air are mixed ahead of the burner, it is called a/an __________ burner. Diffusion Premix Rotary Outside mixing type Diffusion Premix Rotary Outside mixing type ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology An example of indirectly heated furnace is the Muffle furnace None of these Reheating furnace Soaking pit Muffle furnace None of these Reheating furnace Soaking pit ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Heat transfer rate to the stock/charge in the furnace does not depend upon the Use of waste heat recovery equipments Thickness of the stock Size of the furance Emissivity of the refactory walls Use of waste heat recovery equipments Thickness of the stock Size of the furance Emissivity of the refactory walls ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Protective gas used in the annealing furnace for steel coil comprises of 100 %H₂ 100% CO 5% H₂ + 9% N₂ 95% N₂ + 5% H₂ 100 %H₂ 100% CO 5% H₂ + 9% N₂ 95% N₂ + 5% H₂ ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Turndown ratio of a burner gives an idea of the __________ in the furnace. Maximum heat input rate only Minimum heat input rate only Volume of the combustion chamber Range of fuel firing rates Maximum heat input rate only Minimum heat input rate only Volume of the combustion chamber Range of fuel firing rates ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology The reason for excessive clinker formation in gas producers is the Use of coal/coke containing a high % of fines and ash Development of hot spots in the fuel bed and an abnormally high rate of gasification Use of fuel having too low an ash fusion temperature All of these Use of coal/coke containing a high % of fines and ash Development of hot spots in the fuel bed and an abnormally high rate of gasification Use of fuel having too low an ash fusion temperature All of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS