Digital Electronics If 4 input MUXes drive a 4 input multiplexer, it results a 16 input MUX 6 input MUX 4 input MUX 8 input MUX 16 input MUX 6 input MUX 4 input MUX 8 input MUX ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics When will be the output of an AND gate is LOW ? When any input is HIGH When any input is LOW When all inputs are HIGH When all input is LOW When any input is HIGH When any input is LOW When all inputs are HIGH When all input is LOW ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics The simplified block diagram of a 10-bit A/D converter of dual slope integrator type is shown in figure. The 10-bit counter at the output is clocked by a 1 Mhz clock. Assuming negligible timing overhead for the control logic, the maximum frequency of the analog signal that can be converted using this A/D converted is approximately . 500 Hz. 2 KHz. 250 Hz. 1 KHz. 500 Hz. 2 KHz. 250 Hz. 1 KHz. ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics For checking the parity of a digital word, it is preferable to use NAND gates X-OR gates AND gates NOR gates NAND gates X-OR gates AND gates NOR gates ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics (11011) 2 in BCD 8421 code is 01101100 11011001 00011011 00100111 01101100 11011001 00011011 00100111 ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics Which one of the following is not a vectored interrupt? RST 7.5. TRAP. INTR. RST 6.5. RST 7.5. TRAP. INTR. RST 6.5. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS