Power Plant Engineering Ideally the neutron flux in reactor should be Uniform throughout Maximum in centre and zero at side Zero throughout Maximum at side and zero in canter Uniform throughout Maximum in centre and zero at side Zero throughout Maximum at side and zero in canter ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering Ferrite material is The most fissionable material Basic raw material for nuclear plants The material which absorbs neutrons and undergoes spontaneous changes leading to the formation of fissionable material The basic fuel for nuclear paints The most fissionable material Basic raw material for nuclear plants The material which absorbs neutrons and undergoes spontaneous changes leading to the formation of fissionable material The basic fuel for nuclear paints ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering The most practical fuel for a thermonuclear reactor, both from economical and nuclear consideration is Uranium Plutonium Deuterium Thorium Uranium Plutonium Deuterium Thorium ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering In the breeder reactors the generation of new fissionable atom is At an equal rate of the consumption Depends on other considerations At a higher rate than the consumption At the lower rate than the consumption At an equal rate of the consumption Depends on other considerations At a higher rate than the consumption At the lower rate than the consumption ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering A nuclear fission is initiated when the critical energy as compared to neutron binding energy of the atoms is There is no such criterion Same Less More There is no such criterion Same Less More ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering U238 will undergo fission by High energy(fast) neutrons alone Either fast or slow neutrons Medium energy neutrons Low energy(slow) neutrons alone High energy(fast) neutrons alone Either fast or slow neutrons Medium energy neutrons Low energy(slow) neutrons alone ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS