Engineering Drawing Generally, the units used on an architectural drawing are set to __________. Architectural Civil Engineering Metric Architectural Civil Engineering Metric ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first. Pull the line from away from the starting point very carefully Read the coordinate position on the Dynamic Readout Enter 3 for the length of the line Insure that Ortho is on Pull the line from away from the starting point very carefully Read the coordinate position on the Dynamic Readout Enter 3 for the length of the line Insure that Ortho is on ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing A ________ is the person responsible for verifying that the drawings in a project set are free of mistakes. Checker Client Receptionist CAD trainee Checker Client Receptionist CAD trainee ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing The maximum and minimum sizes of a feature are identified by a ________ tolerance. Allowance GD&T Reference Limits Allowance GD&T Reference Limits ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________. Type 3 and try to use the Dynamic Input readout to find the end point Type 3 forward slash and enter Type @3 Type 3 back slash and enter Type 3 and try to use the Dynamic Input readout to find the end point Type 3 forward slash and enter Type @3 Type 3 back slash and enter ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Lines of an isometric drawing that are not parallel to the isometric axes are called this: Multiview lines Dimetric lines Non-isometric lines Trimetric lines Multiview lines Dimetric lines Non-isometric lines Trimetric lines ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS