Nuclear Power Engineering __________ gas is normally not used as a coolant in a nuclear reactor, because of its high neutron capture cross-section. Hydrogen Carbon dioxide Helium Nitrogen Hydrogen Carbon dioxide Helium Nitrogen ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering The number of neutrons accompanying the formation of 54Xe139 and 38Sr94 from the absorption of a slow neutron by 92U235 , followed by nuclear fission is 4 3 1 2 4 3 1 2 ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering __________ nuclear reactor does not require a heat exchanger to supply steam to power turbine. Molten sodium cooled Helium cooled Boiling water Pressurised water Molten sodium cooled Helium cooled Boiling water Pressurised water ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Which of the following is not a good moderating material? All of these Boron 18/8 stainless steel Concrete All of these Boron 18/8 stainless steel Concrete ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. 97 50 3 85 97 50 3 85 ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Secondary cooling circuit is a must in molten sodium cooled fast breeder reactor for Faster heat removal rate from the core Lowering the coolant circulation pressure Avoiding the mixing of water with radioactive sodium, as it may cause explosion Achieving high degree of superheat in the steam Faster heat removal rate from the core Lowering the coolant circulation pressure Avoiding the mixing of water with radioactive sodium, as it may cause explosion Achieving high degree of superheat in the steam ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS