Computer Hardware From what location are the 1st computer instructions available on boot up? CONFIG.SYS CPU None of these ROM BIOS boot.ini CONFIG.SYS CPU None of these ROM BIOS boot.ini ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware In which mode can 2 or more applications be stored in memory at the same time? Protected Mode None of these Real Mode Unprotected Mode Segmented Mode Protected Mode None of these Real Mode Unprotected Mode Segmented Mode ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware To install a second IDE drive into a computer, you must Set the master-slave jumper to slave on the second drive Verify that you define the new drive as D: in the CMOS setup Verify that you attach the drive to the connector at the end of the ribbon cable Use the IDE configuration software to set the new drive as slave Set the master-slave jumper to slave on the second drive Verify that you define the new drive as D: in the CMOS setup Verify that you attach the drive to the connector at the end of the ribbon cable Use the IDE configuration software to set the new drive as slave ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware With a dot matrix printer, light then dark print is most commonly caused by: Misaligned print head None of these Overheating print head Erratic paper advancement Erratic ribbon advancement Misaligned print head None of these Overheating print head Erratic paper advancement Erratic ribbon advancement ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware You are installing an IDE hard drive that will be your boot drive. Which is the correct order of steps that need to be followed? jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch jumper properly, auto-detect in CMOS, regular format jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch jumper properly, partition, low level format, high level format jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch jumper properly, auto-detect in CMOS, regular format jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch jumper properly, partition, low level format, high level format ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware If the memory slots have 30 pins then the chip is a? All of the listed here SDRAM SIMM DIMM All of the listed here SDRAM SIMM DIMM ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS