Electric Circuits Form factor is equal to Peak factor in case of triangle wave. square wave. saw tooth wave. All of these triangle wave. square wave. saw tooth wave. All of these ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Mesh analysis is prefered when loops are------nodes less than greater than any of the above equals to less than greater than any of the above equals to ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits The norton equivalent of the circuit shown in the figure is 1A, 5/6 Ohm 0.75 A, 1.5 Ohm 0.75A, 5/6 Ohm 1A, 1.5 Ohm 1A, 5/6 Ohm 0.75 A, 1.5 Ohm 0.75A, 5/6 Ohm 1A, 1.5 Ohm ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits If one cycle of AC waveform occurs every millisecond, the frequency will be 10 kHz. 1000 Hz. 50 Hz. 100 Hz. 10 kHz. 1000 Hz. 50 Hz. 100 Hz. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits From the circuit diagram shown in question 1 find the maximum power transferred to the load. 15.247 W. 9 W. 1.875 W. 4.547 W. 15.247 W. 9 W. 1.875 W. 4.547 W. ANSWER DOWNLOAD EXAMIANS APP
Electric Circuits Energy efficiency during electroplating is usually in the range 80 to 85%. 85 to 90%. 90 to 99%. 50 to 80%. 80 to 85%. 85 to 90%. 90 to 99%. 50 to 80%. ANSWER DOWNLOAD EXAMIANS APP