Manufacturing And Production Technology For machining a mild steel workpiece by a high speed steel tool, the average cutting speed is 30 m/min 5 m/min 10 m/min 15 m/min 30 m/min 5 m/min 10 m/min 15 m/min ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology For turning small taper on long workpiece, the suitable method is By a form tool By setting over the tail stock By swiveling the compound rest By a taper turning attachment By a form tool By setting over the tail stock By swiveling the compound rest By a taper turning attachment ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology If a gas metal arc process uses a low arc voltage and the arc is continuously interrupted as the molten electrode metal fills up the arc gap is known as ARC length Short ARC ARC blow ARC ARC length Short ARC ARC blow ARC ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The primary purpose of a sprue in a casting mould is to Feed the casting at a rate consistent with the rate of solidification Feed molten metal from the pouring basin to the gate Help feed the casting until all solidification takes place Act as a reservoir for molten metal Feed the casting at a rate consistent with the rate of solidification Feed molten metal from the pouring basin to the gate Help feed the casting until all solidification takes place Act as a reservoir for molten metal ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In hot machining, the work is heated by Induction heating Flame heating Simple heating Any one of these Induction heating Flame heating Simple heating Any one of these ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The abrasive recommended for grinding materials of high tensile strength is Sand stone Diamond Aluminium oxide Silicon carbide Sand stone Diamond Aluminium oxide Silicon carbide ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS