Measurement and Instrumentation For a circuit given that I = 2 ± 5 % A, R = 100 ± 0.2 % Ω the limiting error in the power dissipation I2 R in the resistor R is 25.2% 10.2% 1.2% 5.2% 25.2% 10.2% 1.2% 5.2% ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Unit of deflection sensitivity of a CRO is V / mm. mm / V. meter / volt. mm per mV. V / mm. mm / V. meter / volt. mm per mV. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A DC A-h meter is rated for 15 A, 250 V. The meter constant is 14.4 A-sec/rev. The meter constant at rated voltage may be expressed as 3600 rev/KWh. 960 rev/KWh. 3750 rev/KWh. 1000 rev/KWh. 3600 rev/KWh. 960 rev/KWh. 3750 rev/KWh. 1000 rev/KWh. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A moving iron instrument can be used for AC only DC only Both DC& AC None of the listed here AC only DC only Both DC& AC None of the listed here ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Kelvin’s double bridge is used to measure low resistance because there is no thermo electric emf. resistance variation due to temperature. it has high sensitivity. effect of contact and lead resistance is eliminated. there is no thermo electric emf. resistance variation due to temperature. it has high sensitivity. effect of contact and lead resistance is eliminated. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A resistance is measured by the voltmeter-ammeter method employing dc excitation and a voltmeter of very high resistance connected directly across the unknown resistance. If the voltmeter and ammeter reading are subject to maximum possible errors of ± 2.4 % and ± 1.0 % respectively, then the magnitude of the maximum possible percentage error in the value of resistance deduced from the measurement is nearly ± 1% ± 1.4% ± 3.4% ± 2.4% ± 1% ± 1.4% ± 3.4% ± 2.4% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS