Process Control and Instrumentation Flow rate of sludge is not measured by a/an Orificemeter Both B & C Kennison nozzle Open weir Orificemeter Both B & C Kennison nozzle Open weir ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Suppose that the gain, time constant and dead time of a process with the following transfer function:Gc(s) = 10 exp( - 0.1s)/(0.5s + 1) are known with a possible error of ± 20% of their values. The largest permissible gain Kc of a proportional controller needs to be calculated below taking the values of process gain, time constant and dead time as 12, 0.4, 0.08 8, 0.6, 0.12 12, 0.6, 0.12 8, 0.6, 0.08 12, 0.4, 0.08 8, 0.6, 0.12 12, 0.6, 0.12 8, 0.6, 0.08 ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Nitrogen gas constant volume thermometer is suitable for measuring a temperature of __________ °C. 0-100 < 0 > 100 > 50 0-100 < 0 > 100 > 50 ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation In a single tank system, the transfer function of __________ to inlet flow rate is 1/TS+1. Neither A nor B Here Both A & B Here Outlet flow rate Level Neither A nor B Here Both A & B Here Outlet flow rate Level ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation A typical example of a physical system with under damped characteristic is a U-tube manometer Thermocouple kept immersed in a liquid filled thermowell CSTR with first order reaction Spring loaded diaphragm valve U-tube manometer Thermocouple kept immersed in a liquid filled thermowell CSTR with first order reaction Spring loaded diaphragm valve ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation The temperature of tempering oil baths maintained at 400°C during heat treatment of steel is measured by a/an __________ thermocouple. Iron-constantan Chromel-alumel None of these Platinum-platinum/rhodium Iron-constantan Chromel-alumel None of these Platinum-platinum/rhodium ANSWER DOWNLOAD EXAMIANS APP