Polymer Technology Fillers such as zinc oxide and carbon black are added to the crude natural rubber before vulcanisation in order to improve its Elasticity Weathering characteristics Strength Plasticity Elasticity Weathering characteristics Strength Plasticity ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Polyvinyl chloride (PVC) Can be made thermosetting by adding a plasticiser Is produced by polycondensation reaction Softening temperature is 200°C Uses either emulsion or suspension polymerisation methods Can be made thermosetting by adding a plasticiser Is produced by polycondensation reaction Softening temperature is 200°C Uses either emulsion or suspension polymerisation methods ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Nylon-6 as compared to nylon-66 is None of these Harder More abrasion resistant Having higher melting point None of these Harder More abrasion resistant Having higher melting point ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology Rain coats are made of Polyurathane SBR PVC Neoprene Polyurathane SBR PVC Neoprene ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology __________ is not a condensation polymer. Polystyrene Nylon-66 Dacron Teflon Polystyrene Nylon-66 Dacron Teflon ANSWER DOWNLOAD EXAMIANS APP
Polymer Technology In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. Viscose rayon Acrylic Saturated polyester Polyvinyl acetate Viscose rayon Acrylic Saturated polyester Polyvinyl acetate ANSWER DOWNLOAD EXAMIANS APP