Engineering Materials Dye penetrant method is generally used to locate Core defects Temporary defects Surface defects Superficial defects Core defects Temporary defects Surface defects Superficial defects ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The percentage of carbon in low carbon steel is 0.05% 0.3% 0.15% 0.5% 0.05% 0.3% 0.15% 0.5% ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The stiffness is the ability of a material to resist None of these Externally applied forces with breakdown or yielding Deformation under stress Fracture due to high impact loads None of these Externally applied forces with breakdown or yielding Deformation under stress Fracture due to high impact loads ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials In low carbon steels, ________ raises the yield point and improves the resistance to atmospheric corrosion. Silicon Manganese Phosphorus Sulphur Silicon Manganese Phosphorus Sulphur ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The machinability of aluminium increases when _________ is added to aluminium. Magnesium Copper Lead and bismuth Silicon Magnesium Copper Lead and bismuth Silicon ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Cyaniding is the process of Adding carbon and nitrogen by heat treatment of steel to increase its surface hardness Dipping steel in cyanide bath Obtaining cyanide salts Reacting steel surface with cyanide salts Adding carbon and nitrogen by heat treatment of steel to increase its surface hardness Dipping steel in cyanide bath Obtaining cyanide salts Reacting steel surface with cyanide salts ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS