Electrical Machines During no load test, an induction motor draws power for core loss and copper loss. for core loss and windage and friction loss. for copper loss and windage friction loss. only for the small copper loss. for core loss and copper loss. for core loss and windage and friction loss. for copper loss and windage friction loss. only for the small copper loss. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines What is the frequency of rotor current of 50 Hz induction motor operating at 4% slip? 50Hz 1 Hz 2.5Hz 2HZ 50Hz 1 Hz 2.5Hz 2HZ ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The DC generator runs at a speed of 1000 rpm and flux per pole is 0.2 Wb, number of poles are 2 the winding is wave wound and having 480 conductors. The critical speed is 1200 rpm. Then the generated emf ( Eg ) 1500 Volt. 0 Volt. 1600 Volt. 2000 Volt. 1500 Volt. 0 Volt. 1600 Volt. 2000 Volt. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The slip of an induction motor normally does not depend on shaft torque. rotor speed. core loss component. synchronous speed. shaft torque. rotor speed. core loss component. synchronous speed. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In the V curve shown in figure below for a synchronous motor, the parameter of Y and X coordinates are, respectively Armature current and torque. Armature current and field current. Torque and field current. Power factor and field current. Armature current and torque. Armature current and field current. Torque and field current. Power factor and field current. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 4 pole wave wound dc motor having flux per pole of 9.56 X 10-3 Wb contains 460 armature conductors with armature resistance of 0.6 ohm. Calculate the starting current flowing through the armature if the supply voltage is 240 volt. 800 Amp. 400 Amp. 0.5 Amp. 320 Amp. 800 Amp. 400 Amp. 0.5 Amp. 320 Amp. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS