Engineering Materials Drop forging dies contain carbon of the order of 0.6 to 0.7% 0.7 to 0.9% 0.25 to 0.5% 0.1 to 0.2% 0.6 to 0.7% 0.7 to 0.9% 0.25 to 0.5% 0.1 to 0.2% ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The temperature required for full annealing in hypereutectoid steel is 30° C to 50° C below upper critical temperature 30° C to 50° C above lower critical temperature 30° C to 50° C below lower critical temperature 30° C to 50° C above upper critical temperature 30° C to 50° C below upper critical temperature 30° C to 50° C above lower critical temperature 30° C to 50° C below lower critical temperature 30° C to 50° C above upper critical temperature ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Slow plastic deformation of metals under a constant stress is known as Fatigue Creep Endurance Plastic deformation Fatigue Creep Endurance Plastic deformation ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Combined carbon in iron makes the metal Soft and gives a fine grained crystalline structure Hard and gives a fine grained crystalline structure Soft and gives coarse grained crystalline structure Hard and gives a coarse grained crystalline structure Soft and gives a fine grained crystalline structure Hard and gives a fine grained crystalline structure Soft and gives coarse grained crystalline structure Hard and gives a coarse grained crystalline structure ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Y-alloy contains 3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium 5 to 6% tin, 2 to 3% copper and rest aluminium 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium 4 to 4.5% magnesium, 3 to 4% copper and rest aluminium 3.5 to 4.5% copper, 1.2 to 1.7% manganese, 1.8 to 2.3% nickel, 0.6% each of silicon, magnesium and iron, and rest aluminium 5 to 6% tin, 2 to 3% copper and rest aluminium 3.5 to 4.5% copper, 0.4 to 0.7% magnesium, 0.4 to 0.7% manganese and rest aluminium 4 to 4.5% magnesium, 3 to 4% copper and rest aluminium ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Thermoplastic materials are those materials which Are used as a friction lining for clutches and brakes Do not become hard with the application of heat and pressure and no chemical change occurs Are formed into shape under heat and pressure and results in a permanently hard product Are flexible and can withstand considerable wear under suitable conditions Are used as a friction lining for clutches and brakes Do not become hard with the application of heat and pressure and no chemical change occurs Are formed into shape under heat and pressure and results in a permanently hard product Are flexible and can withstand considerable wear under suitable conditions ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS