Engineering Drawing Dimensions are used on the elevation plan to describe ________. Roof overhangs All of these Roof pitch angles Finished floor elevations Roof overhangs All of these Roof pitch angles Finished floor elevations ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Approximately this much of the cost of product development and manufacture is determined at the design stage: 60-75 % 75-85 % 40-50 % 70-80 % 60-75 % 75-85 % 40-50 % 70-80 % ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing In this type of section, one quarter of the object is removed: Removed section Half section Revolved section Quarter section Removed section Half section Revolved section Quarter section ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Before starting an isometric drawing in Auto-CAD the drafter needs to ________. Turn Object Snap off Turn Ortho off Set the grid to isometric Set the current layer to Def-points Turn Object Snap off Turn Ortho off Set the grid to isometric Set the current layer to Def-points ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing An engineer's scale would be used to measure lines on a drawing where the scale factor reads ________. 3/4" = 1'-0" 1" = 100' 1/8" = 1'-0" 1/4" = 1'-0" 3/4" = 1'-0" 1" = 100' 1/8" = 1'-0" 1/4" = 1'-0" ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing This is a conical-shaped recess around a hole, often used to receive a tapered screw head: Spot-face Boss Counter-bore Countersink Spot-face Boss Counter-bore Countersink ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS