Furnace Technology Design of waste heat boiler for recovery of waste heat from furnace gases depends upon the Quantity & temperature of waste gas Corrosive nature of the waste gas Dust concentration & nature of dust in waste gas All of these Quantity & temperature of waste gas Corrosive nature of the waste gas Dust concentration & nature of dust in waste gas All of these ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Flue gas outlet temperature from the chimney of any furnace should be ideally about __________ °C. 150 250 50 100 150 250 50 100 ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Metallic recuperators are not used for waste heat recovery, if the hot flue gas temperature is above __________ °C, because corrosion prevails at higher temperatures. 750 1250 350 1050 750 1250 350 1050 ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Amount of coal lost in ash particle, which is carried through the boiler system, depends upon the Type of burner and combustion chamber Amount of excess air supplied and load on the boiler Physical nature, ash content and fineness of the coal All of these Type of burner and combustion chamber Amount of excess air supplied and load on the boiler Physical nature, ash content and fineness of the coal All of these ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology The heating capacity of continuous reheating furnace depends upon the Emissivity of the stock Ratio of wall surface to stock surface All of these Hearth area and furnace temperature Emissivity of the stock Ratio of wall surface to stock surface All of these Hearth area and furnace temperature ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Which furnace employs an I.D. fan for the removal of flue gases from the furnace? High pressure boiler Coke oven Beehive coke oven Blast furnace stoves High pressure boiler Coke oven Beehive coke oven Blast furnace stoves ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS