Nuclear Power Engineering Coolant present in the primary circuit of a pressurised water reactor is high pressure Superheated steam Saturated water Sub cooled water Saturated steam Superheated steam Saturated water Sub cooled water Saturated steam ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering The amount of a radioisotope remaining undecayed after a time equal to four times its half life, will be __________ percent. 12.5 6.25 25 3.125 12.5 6.25 25 3.125 ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Plutonium Neither A nor B Is recovered from spent fuel from thermal nuclear reactor Has much lower melting point (640°C ) compared to thorium (1690°C) Both A & B Neither A nor B Is recovered from spent fuel from thermal nuclear reactor Has much lower melting point (640°C ) compared to thorium (1690°C) Both A & B ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering The main purpose of control rod in a nuclear reactor is to control the Conversion of fissile material into fertile material Velocity of the secondary neutrons Emission of hazardous radiation Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission Conversion of fissile material into fertile material Velocity of the secondary neutrons Emission of hazardous radiation Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Which of the following is not a good moderating material? All of these Boron Concrete 18/8 stainless steel All of these Boron Concrete 18/8 stainless steel ANSWER DOWNLOAD EXAMIANS APP
Nuclear Power Engineering Velocity of the thermal neutron (< 0.025 eV) used for fission of U-235 is around __________ m/sec. 9 x 10²¹ 2200 1 3 x 10¹¹ 9 x 10²¹ 2200 1 3 x 10¹¹ ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS