Manufacturing And Production Technology Ceramic tools are fixed to tool body by Soldering Welding Brazing Clamping Soldering Welding Brazing Clamping ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In order to have interference fit, it is essential that the lower limit of the shaft should be Lesser than the upper limit of the hole Greater than the lower limit of the hole Lesser than the lower limit of the hole Greater than the upper limit of the hole Lesser than the upper limit of the hole Greater than the lower limit of the hole Lesser than the lower limit of the hole Greater than the upper limit of the hole ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A drill bit of 20 mm diameter rotating at 500 r.p.m. with a feed rate of 0.2 mm/revolution is used to drill a through hole in a mild steel plate 20 mm thickness. The depth of cut in this drilling operation is 10 mm 20 mm 0.2 mm 100 mm 10 mm 20 mm 0.2 mm 100 mm ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Calculate the weld per minute, work speed of circular electrode of 220 mm diameter for carrying out seam welding at 4 welds per cm on 1.6 mm thick mild steel tube. Welding cycle consists of 3 cycles ‘on’ and 2 cycles ‘off’ Power supply is at 50 Hz. 3000 welds/min, 75 mm/min 500 welds/min, 1250 mm/min 22 welds/min, 55 mm/min 600 welds/min, 1500 mm/min 3000 welds/min, 75 mm/min 500 welds/min, 1250 mm/min 22 welds/min, 55 mm/min 600 welds/min, 1500 mm/min ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The work or surface speed for cylindrical grinding varies from 5 to 10 m/min 10 to 20 m/min 40 to 60 m/min 20 to 30 m/min 5 to 10 m/min 10 to 20 m/min 40 to 60 m/min 20 to 30 m/min ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A lathe with four steps on the cone pulley and with back-gears will have Four indirect speeds Eight indirect speeds Four direct speeds Four direct and four indirect speeds Four indirect speeds Eight indirect speeds Four direct speeds Four direct and four indirect speeds ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS