Mass Transfer An azeotropic mixture is a __________ mixture. Constant boiling point Ternary None of these Binary Constant boiling point Ternary None of these Binary ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Dry bulb temperature of unsaturated air is more than its __________ temperature. Wet bulb Both A & B Neither A nor B Dew point Wet bulb Both A & B Neither A nor B Dew point ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer If the solubilities of different components (in a liquid-liquid extraction system) increase with rise in temperature, then the temperature above which they dissolve completely is known as the critical solution temperature (CST or consolute temperature). If solubilities increase with decrease in temperature, then CST is the temperature below which they dissolve completely. If a binary system has no critical solution temperature, it implies that The system comprises of partially mis-cible liquids The system comprises of miscible liquids On heating, a vapor phase will appear ; while on cooling, a solid phase will appear The system comprises of an azeotrope The system comprises of partially mis-cible liquids The system comprises of miscible liquids On heating, a vapor phase will appear ; while on cooling, a solid phase will appear The system comprises of an azeotrope ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer According to Chilton-Colburn analogy for mass transfer, NSt.NSc2/3 is equal to 1/f F/2 2f F 1/f F/2 2f F ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Weight of 1 m³ of humid air as compared to 1 m³ of dry air, under the same conditions, is More Less Same Unpredictable More Less Same Unpredictable ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer As the reflux ratio in a distillation coloumn is increased from the minimum, the Liquid flow increases while the vapor flow decreases for a system Total cost first decreases and then increases Slope of the operating line in stripping section decreases Number of plates decreases very slowly first and then more and more rapidly Liquid flow increases while the vapor flow decreases for a system Total cost first decreases and then increases Slope of the operating line in stripping section decreases Number of plates decreases very slowly first and then more and more rapidly ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS