Petroleum Refinery Engineering A typical yield of diesel in straight run distillation of crude oil may be about __________ percent. 18 35 28 8 18 35 28 8 ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Which one is preferred for aircraft engine? High freezing point aviation fuel High viscosity index lube oil None of these Low viscosity index lube oil High freezing point aviation fuel High viscosity index lube oil None of these Low viscosity index lube oil ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Concentration of H₂SO₄ catalyst in alkyla-tion is kept between 90-98%, because H₂SO₄ having concentration Less than 90% promotes polymerisation Both A & B Neither A nor B More than 98% promotes cracking Less than 90% promotes polymerisation Both A & B Neither A nor B More than 98% promotes cracking ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Operating condition in the electrical dehydrators for crude oil is about 20 kgf/cm² & 110°C 6.5 kgf/Cm² & 95°C 50 atm. and 150°C 1 atm. & 110 °C 20 kgf/cm² & 110°C 6.5 kgf/Cm² & 95°C 50 atm. and 150°C 1 atm. & 110 °C ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering A good lubricant should have high Viscosity index None of these Volatility Pour point Viscosity index None of these Volatility Pour point ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. 500 20 1 100 500 20 1 100 ANSWER DOWNLOAD EXAMIANS APP