Power Plant Engineering A nuclear fission is initiated when the critical energy as compared to neutron binding energy of the atoms is More There is no such criterion Same Less More There is no such criterion Same Less ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering The percentage of carbon in bituminous coal is in the order of 65-80% 30-50% 50-65% 20-40% 65-80% 30-50% 50-65% 20-40% ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering The efficiency of a nuclear power plant in comparison to conventional and nuclear consideration is Higher cost of nuclear fuel High initial cost Lower temperature and pressure conditions High heat rejection in condenser Higher cost of nuclear fuel High initial cost Lower temperature and pressure conditions High heat rejection in condenser ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering Enriched uranium is required as a fuel in a nuclear reactor, if light water is used as moderator and coolant, because light water has High neutron absorption cross-section Low moderating efficiency High neutron scatter cross-section Low neutron absorption cross-section High neutron absorption cross-section Low moderating efficiency High neutron scatter cross-section Low neutron absorption cross-section ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering A fission chain reaction in uranium can be developed By slowing down fast neutrons so that U₂₃₅ fission continues by slow neutron By increasing the contents of U₂₃₅ None of these Both (A) and (B) By slowing down fast neutrons so that U₂₃₅ fission continues by slow neutron By increasing the contents of U₂₃₅ None of these Both (A) and (B) ANSWER DOWNLOAD EXAMIANS APP
Power Plant Engineering Solar thermal power generation can be achieved by Using focusing collector or heliostates using a solar pond Using flat plate collectors Any of the mentioned system Using focusing collector or heliostates using a solar pond Using flat plate collectors Any of the mentioned system ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS