Engineering Drawing A line drawn with a long section, short dash, and another long section is a __________. Center of a circle Center axis of a hidden cylinder Center of a radius Hidden feature Center of a circle Center axis of a hidden cylinder Center of a radius Hidden feature ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing These are used to attach parts to a cylinder so they won't turn on it: Lugs and bearings Knurls and keys Key-seats and bearings Keys and key-ways/key-seats Lugs and bearings Knurls and keys Key-seats and bearings Keys and key-ways/key-seats ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Drafters should use a ________ in a section view of a mechanical part that includes the cylindrical view of a threaded hole. Dimension line Center line Hatch line Poly line Dimension line Center line Hatch line Poly line ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing In this type of section, one quarter of the object is removed: Quarter section Removed section Half section Revolved section Quarter section Removed section Half section Revolved section ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing A fillet is a rounded surface on the ________ corner of a part. Isoplane Inside Radial Outside Isoplane Inside Radial Outside ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________. Type 3 forward slash and enter Type 3 and try to use the Dynamic Input readout to find the end point Type @3 Type 3 back slash and enter Type 3 forward slash and enter Type 3 and try to use the Dynamic Input readout to find the end point Type @3 Type 3 back slash and enter ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS