Computer Networking A 6-MHz channel is used by a digital signaling system utilizing 4-level signals. What is the maximum possible transmission rate? 12 Mbaud/sec 6 Mband/sec 24 Mbaud/sec None of these 1.5 Mbaud/sec 12 Mbaud/sec 6 Mband/sec 24 Mbaud/sec None of these 1.5 Mbaud/sec ANSWER DOWNLOAD EXAMIANS APP
Computer Networking Network 206.143.5.0 was assigned to the Acme Company to connect to its ISP. The administrator of Acme would like to configure one router with the commands to access the Internet. Which commands could be configured on the Gateway router to allow Internet access to the entire network?1. Gateway (config) # ip route 0.0.0.0 0.0.0.0 206.143.5.22. Gateway (config) # router rip3. Gateway (config-router) # network 206.143.5.04. Gateway (config-router) # network 206.143.5.0 default 3 only 1, 2 and 4 1 only 1 and 4 3 only 1, 2 and 4 1 only 1 and 4 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You save the configuration on a router with the copy running-config startup-config command and reboot the router. The router, however, comes up with a blank configuration. What can the problem be? NVRAM is corrupted. The newly upgraded IOS is not compatible with the hardware of the router. You didn The configuration register setting is incorrect. NVRAM is corrupted. The newly upgraded IOS is not compatible with the hardware of the router. You didn The configuration register setting is incorrect. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You need to gather the IP address of a remote switch that is located in Hawaii. What can you do to find the address? Issue the show cdp neighbors detail command on the router connected to the switch. Issue the show cdp neighbor command on the router connected to the switch. Issue the show ip arp command on the router connected to the switch. Issue the show ip route command on the router connected to the switch. Issue the show cdp neighbors detail command on the router connected to the switch. Issue the show cdp neighbor command on the router connected to the switch. Issue the show ip arp command on the router connected to the switch. Issue the show ip route command on the router connected to the switch. ANSWER DOWNLOAD EXAMIANS APP
Computer Networking On a VLSM network, which mask should you use on point-to-point WAN links in order to reduce the waste of IP addresses? /28 /30 /27 /29 /28 /30 /27 /29 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You type the following command into the router and receive the following output:Router#show serial 0/0 ^% Invalid input detected at '^' marker.Why was this error message displayed? You cannot have a space between serial and 0/0. The router does not have a serial0/0 interface. Part of the command is missing. You need to be in privileged mode. You cannot have a space between serial and 0/0. The router does not have a serial0/0 interface. Part of the command is missing. You need to be in privileged mode. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS